MCI-NEW SUPER IMG

MCI-NEW SUPER IMG

MCI-NEW SUPER INFO

Please Follow the instruction inclose with software to upload in the receiver by PC Or Receiver to Recevier,
To active the patch, pls move the cursor on "Factory default", don't enter in the default set menu, then press "downward (pagedown)" key 4 times, (Click here if you Can't find or Difficalty to find ) there will show key code system item, and the patch will be actived, OR insted of press downward button try 3333

MEDIACOM 930e PLUS

MEDIACOM 930e PLUS

MFT-930+ IMAGE

MFT-930+ IMAGE

MFT 930 & 930e PLUS INFO

To enable codes, go to any channel press F1 and 000. card sharing press F1 and 111. for card sharing and upgrading new software use RS232 cross Cable. From PC to RX upgrading, keep the receiver on standby position. Click loader and press open to browse the software and click on start. RX to RX upgrading, Switch on the master receiver and keep it standby mode connect the cable to other receiver and power on then put 3333 on the master . Don't switch off receiver till you see "END" on your receiver front panel. Master password for the receiver 9876. IMPORTANT NOTE: Please make sure to extract and keep all 3 files in one folder.

MFT-930 PLUS NEW STOCK

MFT-930 PLUS NEW STOCK

MEDIA COM MIRAGE PLUS IMAGE

MEDIA COM MIRAGE PLUS IMAGE

MCI-MIRAGE+ INFO

To enable codes and enable the card activation, go to main menu and press green button twice. for deactivation red button twice. upgrading new software use RS232 cross Cable. From PC to RX upgrading, keep the receiver off position. Click loader and press image file to browse the software and click on send . Don't switch off receiver till you see "MENU" on your receiver front panel. Master password for the receiver 2580.

MIRAG SKY NEW SINGLE CAM IMG

MIRAG SKY NEW SINGLE CAM IMG

MFT-910+ NEW IMAGE

MFT-910+ NEW IMAGE

MFT-910+NEW INFO

If the receiver have male input RS232,use the pin configuration 3 - 4, 4 -3 and 1- 1. For female, use normal RS232 cross Cable. Master password for the receiver 0876

MEDIA COM SUPER IMAGE

MEDIA COM SUPER IMAGE

MCI-SUPER INFO

SUPER receiver updated with SABC (For Africa). To active or edit codes press menu and put 8888. For upgrading new software use RS232 cross cable1.RX to RX upgrading, Switch on the master receiver and connect the cable to other receiver and switch on). Don't switch off receiver till you see " GOOD" on your receiver front panel. Master password for the receiver 2381.Master password can change only from Parental lock.
No posts.
No posts.